Questions & Answers for: Acer cover removal

...How do I remove the current base? Where the footpiece joins up with the screen, you'll find a round cover from left to right which just clips in. carefully squeeze the ends and pull away untill ...

Ad

Question about AL1917W LCD Monitor

3 Answers

...with a universal bridge (I have one HP) but my main problem right now is how to remove the back cover. There are not visible screws and the only thing I can see is a hole with a padlock drawed ...

Ad

Question about AL1917W LCD Monitor

1 Answer

...back open? Did you get the special key or is there a work around? Thanks. After removing the back cover screws that you saw, ok, there is a screw under the stand holder. Remove the cover that

Question about AL1912 19" LCD Monitor

1 Answer

...power board for blown capacitors. To do this remove the 4 screws holding the back on, unclip the cover where the stand is fixed to the screen chassis and remove 4 further screws securing the

Question about AL1717 17" LCD Monitor

1 Answer

LCD Monitor How do I open the back cover 1st remove the base cover by by squeezing to release the clips and remove the 6 base mounting screws. 2nd remove the 5 screws in the back cover. 3rd push and ...

Question about AL1916W 19" LCD Monitor

1 Answer

open back cover on acer lcdAL1916W how do you go about removing back cover to repair board on the acer AL1916W Use the Acer AL1916v service guide as well as the Acer AL1916p service guide to ...

Question about AL1917W LCD Monitor

1 Answer

remove back cover how do i remove back cover, I have already removed base, But I dont see any other screws. All screws have been remove right? Ok, theres clips locking down the back cover at the side ...

Question about AL1916W 19" LCD Monitor

2 Answers

...can see.There are more screws that mount the leg to the monitor .Those are hidden you can not see.Covered by a little plastic cover shell.After you remove all the screws ,now you need to remove the ...

Question about AL1511 15" LCD Monitor

1 Answer

... There are two screws at the bottom which are easily accessible but can't see any others. The front cover is anchored firmly at the top corners and at the bottom where the controls are. They got ...

working fine. Is my Acer monitor dead? remove power to your monitor; then remove the monitor's back cover and, front cover; when you can see the circuit board check for a buldged can capacitor or, two

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...