Questions & Answers for: Chevrolet Monte Carlo cover removal

...monte carlo can not pull out the axles out of the differential You will have to remove the rear end cover then turn over by hand you will see a metal pin going through the smaller spider gears in the ...

Ad

Question about 1997 Monte Carlo

1 Answer

...the upper radiator hose where it clamps onto the engine. The part that the hose clamps onto is a cover for the thermostat. Check the hose and make sure that it's in good shape; if there's soft ...

Ad

Question about 2004 Monte Carlo

1 Answer

...REMOVAL PROCEDURE 1. Remove the fuel injector sight shield. 2. Drain the cooling system. Refer to Draining and Filling Cooling System in Cooling System. 3. Use J 38185 in order to position aside the ...

...remote control handle Removing the clip from inside the door handle 3. If equipped with a switch cover plate in the door armrest, remove the cover plate screws, then disconnect the switches and

Question about 2002 Monte Carlo

1 Answer

...involved in changing a heater core in my 2002 monte ? Hello! Remove the fuel injection appearance cover (if it has one) Drain cooling system Disconnect heater hoses Rmv. right/left instrument panel ...

...the timing marks 3.4L Engine Fig. 7: View of the timing chain and related components with the front cover removed ? 3.4L engine Fig. 8: Retract the timing chain tensioner Fig. 9: The special tools ...

Question about 2004 Monte Carlo

2 Answers

where is the pcv valve for a 2004 Monte Carlo 3800 4.2 L V6 PCV Valve is in one of the valve covers with a hose connected to it. Pull it straight out of the valve cover and remove it from the hose. ...

Question about 2004 Monte Carlo

1 Answer

i am trying to remove the valve cover to my 3.4 litre 2001 chevy monte carlo. how do i remove the valve cover on the firewall side? and also where are all the bolts located. possibly a diagram would ...

Question about 1999 Monte Carlo

1 Answer

...of tool  and a engine light support engine you have to remove oil pan so bottom part timing cover will seal correctly if you dont remove oil pan bottom timing cover seal will be in a bind you ...

Question about 1998 Monte Carlo

1 Answer

inside the transmission. You drain the fluid (hopefully there is a drain plug) and remove an access cover plate, or more likely, the transmission's bottom cover to access the filter. If no drain plug,

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...