Questions & Answers for: Kia cover removal

...Removal of left valve cover there is 2 coolant hoses heater that will need to pushed under valve cover once free from spark plug tubes or you will have to disconnect the upper hose...but makes mess ...

How to remove engine valve cover of Kia Carnival LS model diesel engine? We are trying to remove the valve cover to replace the gasket and the injectors are somehow preventing us to remove the cover ...

1999 sportage stopped running, trying to replace timing belt. Removed upper timing cover tried to start, lower timing gear at crank moves but not the belt and camshafts. Cannot remove lower cover, the

...removal is not required for this procedure. 1.Remove the engine cover. 2.Remove the RH front wheel. 3.Remove the 2 bolts and RH side cover. 4.Temporarily loosen the water pump pulley bolts. 5.Remove ...

...budlight or smirnoff 1- jack up the car and remove left tire. 2- remove two platic retainers in the cover under the fog light hole, purpose of this is to provide enough room for the fender cover to ...

...spark plugs on my 1991 kia sportage If your sportage has the 4 cylinder engine, there is a plastic cover over the engine that is held down by 4 bolts, one at each corner. Remove the bolts with a

...cover bolt torque sequence and specification-3.8L Engine Install the timing case cover oil seal. Continue the installation in the reverse order of the removal procedure. I hope that this image

...If you are feferring to the valve cover gasket, Just remove the cover and replace the gasket. You may need to remove other hoses and disconnect wiring harnesses to accomplish the removal of the

...Remove race with a chisel. 4. Remove wheel bearing with suitable tool. • Do not remove dust cover unless necessary. • Do not reuse dust cover if removed. 5. Mark relative positions of dust ...

I can't remove the valve cover on my 99 kia sportage. I am "simply" trying to change the valve cover gasket, and the valve cover won't come off. I believe I removed all the bolts