Question about 2003 XL 1200 C Sportster Custom
...o ring at end of clutch into primary? Right out of the manual 1.Remove the clutch inspection cover screws and remove the cover. Note: When removing the clutch inspection cover, work carefully ...
...cover. Remove the spring and the locknut. Now, remove any footpegs or anything else that may be in the way of the removal of the outer primary. Loosen the locknut on turn the primary chain tensioner ...
remove primary cover 1990 sportster To remove your primary cover, first, disconnect the battery and drain the oil from the primary. Then, remove any footpegs or shifter mechanisms that might be in the
...cover on a 89 sportster First disconnect the battery and drain the primary. Then remove any shifters, footpegs, or anything else that might get it way of the removal process. Look on the very bottom ...
removing primary cover on 04 1200c To remove the primary cover from you Sporty, you'll have to remove the shifter and foot peg. Then loosen the locknut for the primary chain adjuster and turn the ...
a lower bolt on the primary cover broke,so i removed the shifter and foot peg bracket,then removed all of the bolts from primary cover after draining primary fluid. The primary cover still doesnt seem
...on 2002 sportster First disconnect the battery cable. Then you'll have to pull the primary cover off the engine. Find the primary case drain plug underneath the rear of the primary case and ...
Question about 2005 FLHTCUI Electra Glide Ultra Classic
...cover removal How do i remove the primary cover Hi Anonymous, for more information on your question please visit the websites below and good luck: Stator Repair 1 of 9 Removing Inspection Cover on ...
Question about 2005 FLHTCUI Electra Glide Ultra Classic
how do I remove the battery cover on a 2014 wide glide I want to remove the hd trim on the battery cover If there is no visible way to remove cover then you may need to pop it off. Try pulling the ...
Question about 2005 FLHTCUI Electra Glide Ultra Classic
how do I remove and replace a primary cover on a 01 sportster 883 ? It's fairly easy. Remove footpegs, shifter lever and anything else in the way. Drain primary oil. Plug is underneath the cover. Back
Usually answered in minutes!
681 Questions
595 Questions
586 Questions
644 Questions
456 Questions
