Questions & Answers for: Honda CB 100 correct spark plug gap 99

Question about Honda CB 100 Motorcycles

1 Answer

spark plug and the wire to the coil, it started, but after about a week of time it wouldnt start again. what think the problem is ?? Hey, The 'wire to the coil' that you mentioned could be the problem

Ad

Question about 1976 CB 100

1 Answer

spark plug and the spark plug is sparking and the carb is working fine so what could be wrong any help plz Head or base gasket leak, spark is happening at the wrong time. Any of these will cause it to

Ad

Question about 1970 CB 100

2 Answers

spark advancer for proper function. Twist the point cam and it should snap back to the correct original location. If not MARK the relationship between the point cam and the advancer base... HINT.. you

...spark plug and earth the plug on the metal part and turn it over dont hold the spark plug as you will get a shock if the plug sparks you know the ignition system is working.if you have no spark do a ...

whats the correct spark plug gap for a 1972 honda cl 100. and what is the recomended type of oil to use? Try to used spark plug with single spacer and use 20w /50 motor oil.

...correct spark plug gap for a 1972 honda Whats the correct spark plug gap for a 1972 honda cl 100. And what is the recomended type of oil to use? Correct spark plug gap is 0.6 -0.7mm and oil viscosity ...

Question about 1972 CB 100

1 Answer

...into every fitting and hole in the carb body. Spray into both ends of each circuit. Wear gloves and goggles. Done properly, this and a new spark plug should do the trick. Set the spark plug gap to ...

Question about 1972 CB 100

1 Answer

spark plug is another; start with a new spark plug. If I recall correctly from 39 years ago, your bike has ignition points and condenser. Remove the points cover (on left end of the overhead cam), and

Question about 1973 CB 100

1 Answer

spark plug out,and slowly spin the engine with the kick start. Once you get it to the highest point on the points cam,the points should be "open". Insert feeler gauges untill you find the correct one.

gap is set right, advance seems to work good, it's getting fuel and has good spark. But it still will not I can constantly kick the bike over and all it does is backfire out the carb. That leads me to

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...