...Corolla GL 90 model RPM goes up every time i hit the break. Look for a valve in the hose connected from the brake master's hydrovac going to your engine's intake manifold . check if it is still ...
...with a 14mm. socket and pull off old gasket, may have to be scraped, install new and torque bolts to 33 FT. LBS......... same with intake manifold but 10mm. and 12 FT. LBS of torque and drain
intake manifold gasket replaced on their 84 toyota corolla SR5 They have asked my husband and son for help. How complicated is it to do this on this car? What is the process? Is it something that a do
...corolla 1998 do I have to remove the intake manifold to get easy access to the starter bolts? No. Removal of the intake manifold is not an attractive option. ...That will cost you more time and money ...
need torque specs for 1987 toyota corolla fx-16 head bolt,intake and exhaust manifold? http://opc.mr2oc.com/online_parts_catalog/Engine/torque%20-%20TVIS.gif
...corolla 1.8 sohc p0171 found dirty mass air flow cleaned results the same replaced it 2 days go by and again the same code pops up p0171 fuel fystem too lean bank 1 the down stream o2 is switching ...
...corolla 1989, it backfires, frequent engine shutdown mostly when the engine is hot but not overheating, i already replace my ignition coil, adjust timing and cleaned my carburetor. Sounds like an ...
...Go to http://gorup-sinkovec.net/diy/rattling-noise-in-toyota-corolla-intake-manifold-solved/#comment-375 Follow method described and illustrated by Cobus. Worked a treat for me, took 2.5 mins. ...
...parallel to your valve cover. If you look at your motor, the exhaust manifold is on the front of the motor, and the air intake manifold is on the back of the motor near the firewall. Hope this ...
intake manifold What's wrong with the intake manifold? Sir!
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions
