...cooling fan when put new motor in it worked for while then engine light came on hasnet worked since , noticed the realy switch was backwards bought new one replaced fan temp gage sensor still nothing ...
...problem or something else? try checking the coolant resivoir level sensor has not come loose or got a bad conections in the plug. make sure your cooling fan is working, check the relay to the ...
...cooling fan. 5. Using an ammeter and jumper wires, connect the fan motor in series with the battery and ammeter. With the fan running, check the ammeter reading, it should be 3.4-5.0 amps; if not, ...
...FAN DOES NOT TURN ON. SO I REPLACED THE RELAY. AND THEN THE SENSOR. AND SO ON AND SO ON. HERES WHAT U GOTTA DO. GO GET GAS FOR THE TANK SO YOU DON'T RUN OUT. THEN MAKE SURE EVERYTHING ...
...cooling fan is not coming on. The 30a fuse is just fine. I am not sure how to test the relay if it is good or /bad. I did try to bypass the relay by using a jumper but that didn't turn the fan on. ...
...cooling fan does not operate properly it is not the relay- have changed it the temp gauge works so dont think its the sensor it does work sometimes with ac on so fan is good- is the computer bad? I ...
Question about 1997 Sunfire
...cooling fan not coming on, checked fan motor, changed the coolant temp. sensor, havnt driven it yet, was wondering it that could have anything to do with the fan There is a yellow and black wire in ...
cooling fan, and an engine temperature sensor that was used by the ECM as part of the engine control loop. Newer cars (this one included) use the coolant temperature sensor for both purposes. There is
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions