Questions & Answers for: Plymouth Neon coolant system

...coolant tank is broken! You may have to remove the tank to figure out which as the hose is hard to get to with the trank bolted down. The hose could be rotted or the cap may not be releasing buid up ...

...system when replacing coolant!! if air is trapped in system it will not heat up proper. turn fan on high heat locate bleeder for cooling system, open bleeder with car running. if there is any air in ...

coolant system is full if all ok replace the cooling fans. if the coolant level is low in the radiator you may have an air pocket in the radiator giving the coolant temperature sensor a faulty reading

system that removes that dangerous excess heat. Some of an engine?s excess heat is released through the exhaust. Most of an engine?s excess heat is absorbed by a circulating liquid coolant, which is a

...COOLANT SYSTEM WILL CAUSE CAR TO OVERHEAT. Radiator could be plugged, head gaskets are common problems. The timing belt drives the water pump, These cars are bad news. Have your mechanic do a Block ...

...coolant system I have a 1995 Plymouth Neon that keeps getting oil in the radiator. The oil is always clean w/ no water in the oil. Is it possible to get engine oil in the radiator? Some say it may be ...

when you first check it, is why was it low? Keep an eye for any coolant dripping down on driveway, or engine, and be sure to check return bottle level often for next few days in case of leak in system

...system function. ANY time you open a coolant hose componet air gets in, it has to be bleed out or the result is a HOT engine. TIP: turning on your heater to full will assist in the "burp" process, as ...

...coolant system that sends that information to the PCM and the PCM then sends a signal to your temperature gauge to register it. Once the temperature of the preset peak, the PCM then sends a signal to ...

...system, you will need to bleed it. Take the radiator cap or coolant expansion cap off, with engine turned off, Now squeeze the bottom hose, and the top hose continually until you see bubbles appear ...