coolant in my car? Open the surge tank cap and pour the coolant in. At the top of the therm. housing, you'll see a bleeder valve. Start and run the car, make sure the surge tank is full, and crack the
...surge tank, the heater and the radiator to the inlet housing. Fill the cooling system with the proper type and mix of coolant. Step4 Reattach the negative battery cable. Start the engine and allow it ...
...coolant from the cooling system. Disconnect the surge tank outlet hose and remove the drive belt. Remove the idler pulley and the water pump pulley, making sure to note the locations of the bolts as ...
...coolant burning off. If you are seeing black smoke, you have some pretty bad problems. How is your fuel mileage? How is the power? Any engine codes? If you think it's pre-ignition, this is easy to ...
coolant not low nor found no visible leaks/'98 Pontiac Grand Prix GT if it is NOT low, and the car is NOT running hot, the problem is in the sender unit in the surge tank, located at the bottom of
Usually answered in minutes!
1,496 Questions
1,236 Questions
1,211 Questions
1,043 Questions
1,014 Questions