Questions & Answers for: coolant light focus wont

Question about Magnavox 51MP392H Rear Projection Television

4 Answers

...light in this case, since you will be looking for the difference between white and yellow. I you see a white plate inside, good. If the inside looks yellow, and has floating things in it, then the ...

Ad

Question about Magnavox 51MP392H Rear Projection Television

6 Answers

coolant change on a rear projection tv color cloudy out of focus Here is a detailed step by step guide with pictures http://www.riddledtv.com/repair/journal/CRTCoolant/ You can do it yourself. You can

Ad

Question about Magnavox 51MP392H Rear Projection Television

1 Answer

...light sent through the fluid or something such as that??? Thanks for your help. Gary Yes the coolant sits in a chamber which is attached to the face of the picture tube, and the image has to pass ...

Question about HCN653W 65" Rear Projection Television

4 Answers

...light in this case, since you will be looking for the difference between white and yellow. I you see a white plate inside, good. If the inside looks yellow, and has floating things in it, then the ...

...light was off an so forth. checked the water an it was bone dry. put antifreez in an it all just leaked right back out from the front of the block from one of the pullys. what do i do? the pully that ...

Question about 43H71 43" Rear Projection Television

1 Answer

light on front blinks The blurry must be defined as out of convergence or out of focus,If there is a lines of color on the pictures edges, its convergence, if the picture is not sharp the focus is the

...light works, and if it stays on, get the codes read to get an idea of what error the computer has found. (A bad coolant sensor for the computer can make the computer think that it's well below ...

coolant light wont go off and it is completely(maybe even over) full capacity When you say that it's full, are you referring to the coolant recovery tank? Have you checked the level in the radiator? ...

Question about 2003 Focus

1 Answer

coolant light wont dissapear Replace the coolant level sensor.

...the coolant temp sensor you put the ecm values at default try that if it corrects your issue replace it.(it will turn your check engine light on but you can clear later by disconnecting

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Cindy Wells

Level 3 Expert

6688 Answers

 Grubhead
Grubhead

Level 3 Expert

5755 Answers

Are you a Televison & Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...