...MPH the RPM are about 4000 RPM, Prior to the Transmission being rebuilt the car ran around 2,500 RPM at those speeds. I had 2 Mechanics see it and they told me that it was fine. I might be going nuts ...
Question about 1999 Silhouette
mph, 2000 rpm, the engine jumps to 4000 rpm all by itself. This lasts for 5 seconds, then it returns to 2000 rpm. During this time, I can not accelerate. change tranny fluid with mercon v also can add
...rpm goes really high while the mph is barely 20 mph then it shifts hard. what causes this problem Hi I am Vortash sounds like Torque slip check your fluid levels in the transmission. Rpm will rise if ...
...but doesn't seem to speed that much. it runs at 3500 at 35 mph, 55 mph and to go to 65 on hiway it runs at 4000 rpm in overdrive. it is shifting into 4th. Check your Tran oil pump or torque ...
Question about 1989 Bronco II
...mph the motor whines at about 3500 rpm. The torque converter never kicks in. Anybody know how to fix it. Please help me The lockup converter will only drop the engine speed about 500 rpm.Sure it gets ...
...mph it wont keep up the rpm goes up like its going to explode You are expecting a lot from a torque converter to full 2.5 tons at 60 mph. The converter will be a standard unit and will experience ...
...rpm at 65 mph When riding at around 65 mph the rpm is at 2800 and when i go to accelerate the care jumps up to 3000 rpm then drops back off to 2800 rpm. What could be the reason for this? At a steady ...
...rpm at 70 mph. Do I have a problem with the trans? no I don't think so , it is only the torque converter clutch engaging and disengaging due to engine load. if you want to test this. go on steady ...
...convert mph to rpm using the ifit program the lady tells me to pedal at 45 rpms and my bike is set for mph http://www.livestrong.com/article/1003340-convert-mph-rpm-cycling/ or try contacting the ...
Question about 2005 Escape
...mph and note the rpm number. Say it is 2500 rpm-that is with TCC engaged-now if you tap and very lightly hold the brake pedal down just a tad-not enough to cause braking, just enough to cause brake ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions