Questions & Answers for: controls locked

kitchenaid superba stove I have a superba stove and i accidently turned the control lock on, which locks all the buttons on the oven so i cant even use it. How do i take the control lock off? Control ...

...hold END OF CYCLE SIGNAL for 3 seconds. The CONTROL LOCKED status light glows. To unlock the controls Select and hold END OF CYCLE SIGNAL for 3 seconds until the CONTROL LOCKED Status light turns

what does the sign "control lock" mean? the only button that works is the "oven light" button. I have a model: KEBI1010BL7 // Serial # XJ1901009 Here is what the manual for your oven says about ...

locked Hi, If you want to enable the Controls Lock/Unlock Feature:- To enable the Controls Lock feature when dryer is running: Press and hold the CONTROLS LOCK/UNLOCK button for 3 seconds. The control

...controls locked is displayed. what causes this and how do i get the controls unlocked. Press and hold for 3 seconds the "Control Lock/Unlock" button on the control panel to lock the control panel. ...

locked and the filter light is still on. How do I reset this light and unlock the control? If the Control Lock feature has been enabled, the Control Lock light will flash 3 times indicating that it is

controls locked The controls are locked. I dont know why but obviously i cant set the machine off. How do i unlock the controls? I have tried the old switch it off and then back on again but the ...

CONTROL LOCK GE GAS DRYER EVERY TIME YOU PUSH START CONTROL LOCK LIGHTS FLASH AND WILL NOT START Press and hold for 3 seconds the "Control Lock/Unlock" button on the control panel to lock the control ...

...door lock switch • Door lock actuators in each of the doors • DR LK Fuse 20-amp Door Lock System Controls The Power Door Lock System is controlled by the body control module (BCM) and can be ...

...of the doors • IBCM (PWR) 15-amp fuse • Driver door cylinder switch, if equipped Door Lock System Controls The Power Door Lock System is controlled by the body control module (BCM) and can be ...