...Please any solutions would be appreciated. take a look at the EGR valve it could be either vacum controlled or electronic either way what seems to be the problem is that the valve is stuck in the ...
trying to find the heater control valve where is the heater control valve located on a 1990 crown vic with 5.0 motor its on the pass.side of enginbe bay by the a.c. evaporator
...control valve i think it is mounted on the firewall by the top close to the hood it will have two black 5/8 hoses attached to it check and make sure it still has the cable attached to it before you ...
...COULD BE THE HEATER CONTROL VALVE BAD OR IT COULD BE A VACCUM HOSE HAS COME LOOSE OR IT COULD BE IN THE CONTROLS ,I WOULD CHECK THE VACCUM HOSES FIRST THEN THE HEATER CONTROL VALVE THEN GO FROM ...
...control valve. This valve opens to allow hot coolant into the heater core and closes to cut off the flow. It should be located on or near the firewall behind the engine. It should have coolant hoses ...
how to replace a heater valve of a 2002 crown vic? Heater valve or core? Heater control valve is as simple as loosening clamps and pulling hoses off. Reverse to install. Fill with anti-freeze.
Question about 1995 Crown Victoria
...air control valve regulates the engine speed. The computer activates the control valve when it sees the engine speed drop below a pre-set RPM.Could be a dirty throttle body or faulty IAC
where is the heater control valve on 2006 crown vic This car doesn't use a heater control valve.
Question about 1999 Crown Victoria
where is the temperature control valve and how is it replaced air conditioning does not work If the car has automatic climate control, there should be a plastic valve in one of the heater hoses.
...control valve which makes hot water go through the heater core. The water valve is operated either by cable or Vacuum control. Feel the 2 water lines from the heater core when the engine is hot. They ...
Usually answered in minutes!
454 Questions
486 Questions
323 Questions
297 Questions
294 Questions