Questions & Answers for: KitchenAid control panel removal

Control Panel I need to replace the membrain switch inside the control panel.I have removed 7 screws on the underside of the panel and don't see anything else to remove,but still can't get the control

...control panel, first unplug the washer then on the bottom of the control panel are two screws, remove these then the control panel should pull forward and flip up to give you access to controls. ...

...control panel at the latch at the very top middle of the door. You can them open the door and remove the screws that hold the control panel on. When the control panel is removed you will have access ...

...control panel of the dishwasher. The part number for the thermal fuse replacement is W10258275. If you type in your model number you can utilize the exploded view parts diagrams at ...

Control panel unresponsive Recently had to replace the wash arm retainer nut. Replaced it but then the dishwasher control panel is unresponsive. No lights even indicting it is working. Checked ...

...control panel on the right and left sides. Fold the control panel to the rear of the machine. Unplug the lid switch wires. Remove the 2 S clips from the right and left corners that secure the back ...

...control panel in place. Remove these screws and remove the control panel. You will now have access to replace the part. Please be aware that the unit stores lethal voltage even when unplugged. F2 ...

...control panel remove control panel to fix it Service manual Note: remove the back splsh panel to access the control. UNPLUG the stove. It is always hot from L-2 to oven elements. Unplug this puppy ...

...control panel. have reomved the screwws along bottom of this panel but it does not move enough to access anything. how do i get in to the control panel? Remove two screws beloe the panel just above ...

...control panel on the right. It is held in place by two screws - one on each side of the screw that holds the control panel in place. 5) You can remove the shield in #4 without removing the control ...