Questions & Answers for: control displays loc

Ad

Question about Profile Spectra JGBP90 Gas Kitchen Range

1 Answer

...and the display will show LOC ON. The control lockout mode affects all controls. No controls will work when this feature is activated. The adjustment will be retained in memory after a power

Ad

Question about Affinity ATF7000E Front Load Washer

1 Answer

LOC and wont run Control Lock To avoid having someone accidentally start or stop the washer, press Options and Select at the same time and hold for 10 seconds until ?LOC? is displayed alternately with

Ad

Question about Affinity ATF7000E Front Load Washer

1 Answer

...LOC" is displayed alternately with the estimated cycle time to lock the controls. Unplug the machine for at least half an hour, if pressing the buttons does unlock the controls, to forcibly reset the ...

Question about Elite 44173 30 in. Electric Cooktop

2 Answers

control panel until "LOC" disappears from the display. Some oven models have a button marked "Oven Lock," which should be used instead of the "Stop" button. Lock the oven again by pressing and holding

Question about Elite 44173 30 in. Electric Cooktop

1 Answer

...and hold the GAS/CONTROL LOCKOUT pad for 3 seconds until the display shows LOC. To unlock the control, touch and hold the GAS/CONTROL LOCKOUT pad for 3 seconds until LOC disappears from the

Question about ATF6000ES Front Load Washer

1 Answer

loc coming up on frigidaire washer front load The controls have been locked unintentionally and this is a safety feature to avoid having someone accidentally stop the washer or modify the cycle. It ...

Question about ATF6000ES Front Load Washer

1 Answer

...LOC Do the following:The Control Lock (child lock) is on: To prevent accidental operation of the washer or alteration of the cycle settings, press and hold the lock symbol until you hear 3 beeps and ...

Question about ATF6000ES Front Load Washer

1 Answer

LOC is a control panel lock not a door lock, see below. The Control Lock shuts down the control panel pads to prevent unintended use of the ovens. When the control is locked, only the CLOCK, TIMER SET

Question about ATF6000ES Front Load Washer

1 Answer

loc has to do with control lock: control lock (press and hold) to lock the controls between or during cycles, press and hold the add steam button for 5 seconds. loc will be displayed if you attempt to

...control should briefly go blank, briefly display all segments. briefly 'display "LOC FIEF," display all segments for 30 seconds, and then display "LOC REF:" 7. Acknowledge the "LOC REF" command by ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Kitchen Ranges Experts

Marvin
Marvin

Level 3 Expert

85178 Answers

Paul Carew

Level 3 Expert

3455 Answers

Brad Brown

Level 3 Expert

18108 Answers

Are you a Kitchen Ranges Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...