...control board ? Defective I/O control board 1. Make sure the following are connected properly: ? CN212 and CN229 on the I/O control board ? CN303 on the main control board ? CN7 on the AC drive board ...
Question about ATF6000ES Front Load Washer
control board failed. Replace control board orwire. E24 Drain pump relay on control board failed. Replace control board orwire. E31 Pressure sensor not communicating with control board. Refer to test
control board failed. Replace control board orwire. E24 Drain pump relay on control board failed. Replace control board orwire. E31 Pressure sensor not communicating with control board. Refer to test
...control board ? Defective main control board ? Worn Transfer Belt Troubleshooting Procedure: 1. Make sure the high voltage cable and trigger lines are properly connected to the high voltage supply ...
control board failed, wire off pump or pump Replace console control board, wire or defective. pump. E24 Drain pump relay on control board failed. Replace console control board. E31 Pressure sensor not
Question about 43142 Front Load Washer
...control board and optics control board) Definition: [level: D] The main control board does not communicate with the optics control board. Possible causes: · Main control board defective · Optics ...
Question about 43142 Front Load Washer
...control board but am unable to change the code to the one printed on the inside of the fridge. I've tried several times but it continues to beep Model #MFI2568AEs You should have got a new code for ...
Question about 43142 Front Load Washer
...control board? We are putting in a new control board. Hello Verlaine; My name is Peter. I am a retired field service refrigeration technician. Please let me help you. You received the new control ...
Question about 43142 Front Load Washer
...control board checks and determines the software of the new service board. 1. If the IO board package file contains the new service board, the control board updates the software of the new service ...
Question about 43142 Front Load Washer
...control board, and clock all refer to the same part. F0-0 - No Error - Initial Factory Setting. F1-1 - Over Temperature While Cooking - Check oven temperature sensor and wiring. Replace if defective. ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions