How much would a mass air flor sensor & front How much would a mass air flow sensor & front control arms (steering) cost to repair on a 1998 passat with 143M miles on it. Automatic. ABOUT $800
...most likely a worn CV joint in the axle. The noise on rough roads is likely a ball joint or upper control arm ( there are 4 of them on your passat ) . I would take your car to an alignment shop for ...
where is engine control relay 2005 passat j271 remove the plastic plenham chamber cover (at the base of the windscreen). this is the big cover that hides the battery and brake master cylinder. you ...
...it back and reverse the whole process of dismantling. take off the spindle remove the axle, lower control arm outter tie rod too and strut buy the bearing and take it to a machine ...
...2. Why would you want to separate it, if it weren't a uni? 3. Your problem is most likely a bent control arm, see an alignment shop to have it
...a reasonable price for this work? No, that is an outrageous price if you are referring to the control arm bushing. That bushing costs around $65 at a VW dealer and can be bought aftermarket for ...
...112k my 2007 passat did the same noise over speed bumps only!! so the dealer replaced the lower control arm bushings and that fixed the ...
...control arms? Absolutely! This rattle noise is coming from one or more bad control arms (ball joints & bushes). You should carefully check all of them, then replace bad control arm(s). The best ...
...control arms on my 98 Passat. My 98 Passat with 114,000 miles has been making a noise when I hit a pot hole while turning. I took it in to my repair shop and they quoted me $2000 to replace the ...
2007 vw passat clunking when moving off clunking when starting to move Check cv axles, ball joints, and control arm bushings.
Usually answered in minutes!
1,322 Questions
1,089 Questions
831 Questions
844 Questions
677 Questions
