Questions & Answers for: Pontiac Grand Am control arms

...control arms and the body . Most have sway bar links on the control arms, but some are mounted with clamps.If it is broken or the bushings are worn it is easy to fix. Just make sure you tighten the ...

...Will those years fit as well? If not can I get the control arm assembly anywhere or do they not make them? salvage yard part ... i have both arms if you want to bye them email me or ...

...control arms (11) pivot from the crossmember (12). On base models conventional rubber bushings are used for the lower control arm pivots. On up-level suspensions the front bushing is replaced by a ...

how do i replace control arm bushings Remove the control arms. You will need a press to remove and install the bushings. You might want to take the control arm to a machine shop to have them done.

...under the frame. Lower the car slightly so the weight rests on the jackstands and not the control arm. Remove the front tire and wheel assembly. Be careful to avoid over-extending the axle ...

changing control arm bushings on a 1995 pontiac grand am se 3.1 L V6 the control arm will have to be removed and brought to a machine shop to press the bushings

...and I'm leaking coolent like crazy from a hose right underneath the surge tank down near the control arm bushing how do I fix these problems? replace hoses, fan issue is most likely a sensor ...

...I would look at the antisway stabilizer bushings...they look like pins(bolts) that mount to the control arm and then to a bar that goes from one side to the other...these have a high failure rate ...

...dropping in back door then window fell half way down. Now window will not stay up and power controls do not control it. How do I remove panel and fix it? The window is raised and lowered by a ...

suspension bushings where are suspension bushings located The bushing will be located at the ends of the control arms front and back Will be rubber in the end of the arms with bolts going through them