...the same problem and Nissan never did a recall on it. Problem is that the left side lower control arm was manufactured incorrectly ( half an inch shorter than was specked out to be); as per ...
...press out the old ball joint or do I need to do like nissan recommends and replace the whole lower control arm? What is needed a spring compressor and some wrenches? most of these ball joints can be ...
...control arm is expensive an not needed. Thanks a lot. Sorry guys not a solution but I too have an 04 Quest, which supposedly has worn controller arm bushings and Nissan says I need both controller ...
...control arms but not the front. Can anyone point me in the right direction? Can you use the bushing for the rear on the front? Thanks did you try any other part stores. if you don't have a press, you ...
...control arms replaced. The car still has a "knuckling" noise when I'm making semi-hard left or right hand turns. Forget about hard turns!! Shouldn't the replacement of the bushings and control arms ...
2004 nissan quest Control Arm Bushing front Suspension the only thing i need is the bushings ebay has them
...left/right movement in the wheel. Get it done soon as the ball joints hold the spindle to the control arm and if it pops out the wheel comes off...not good when driving wheel has 1 to 2mm ...
I have a Nissan Quest 2004. I need the front lower... I have a Nissan Quest 2004. I need the front lower control arm bushings (right and left) ebay
We have a 2004 Nissan Quest and they have told us that we need to replace the driver side low control arm bushing, how many bushings do we need or do we have to replace the whole thing ? They could ...
We need to fix the front ball joints. The only thing i find is the control arm is there any way I can just get the ball and can get it fix Its easier to replace complete control arm it will have new ...
Usually answered in minutes!
436 Questions
322 Questions
285 Questions
217 Questions
205 Questions