Questions & Answers for: Hyundai Elantra control arms

...have a problem 1-remove wheel2-remove axle center bolt.3-undo bolt of sway bar link on lower control arm.4-undo bolt of lower ball joint and separate lower control arm from steering ...

howto replace the right side lower control arm This has been recalled. Take back to dealer, or get refund for work performed.

Which fuse controls the burglar or anti-theft alarm on a 2004 Hyundai Elantra? I removed the one called "burglar alarm" (or "start"), but it is not the right one. The OE alarm is part of the ETACS To ...

,i dont think its a cv joint as they normally clunk whilst turning.Im thinking steering,tie rod end,control arm bush etc...any ideas? you are right it is probably your balljoint or tie rod end have it

how do I remove the lower ball joint in order to remove driver"s axle on 2000 hyundai elantra remove pinch bolt and ten pry lower control arm down.

broken control arm on a 03 hundya broken control arm on a 03 hyundia drove off a road edge need to replace have removed part but does any of the parts have to be pressed on such as the ball joint ,and

...have problem control arms i want to order control arms and i want to know how much the part of the car cost i found them for 81.00. they come with new balljoints, check it out a the web site

hyundai elantra control arm how to install hylantra control arm 1.jack car up and remove wheels.2.undo ball joints3.undo inner and outer control arm bolts4.remove control arm

rear rattling noise trunk area also squeaking 2007 elantra Try looking at the Rear Lower Control Arm Bushings. There is an inner and an outer on both sides. The outer is most likely. To easily see ...

1997 elantra cruise control not working. I had 2 brake bulbs out but replaced them, all lights now work but still no c.c. Switch on dash illuminates but button on wiper arm no longer activates the c.c