...strut on the inner fender well,then take the 17mm bolt out of the bottom of the strut on the lower control arm this will make it drop down.Then take the 14mm bolt louse that fastens the ball joint
...control arms are replaceable on most models. This procedure requires the use of a press and may be above the skill range of the average driveway enthusiast. It is recommended that this procedure be ...
...pass safety cause of upper control arms how do i replace my upper control arms on my honda??? and what tools are needed Buy a workshop manual(Haynes or similar) & that will show you how to do it
...joint? 2002 Honda Civic LX Front Passenger side. Lower ball joint. I had a question i bought a used control arm for a 2001 honda civic compared it to the original and everything was the same except ...
howto replace control arm bushing does the control arm need to be removed from the body of the vehicle and does the bushing need to be pressed in? Yes, the control arm needs to removed. And the ...
howto replace control arm bushing Does the control arm need to be removed from the body of the vehicle and does the bushing need to be pressed in? yes and yes
...control arms? Or how can i tell if i really need to replace them or if im being ripped off by mechanics? The only time you should EVER have to replace control arms is if they are bent or physically ...
...control arms in the front, but how can I tell if they're bent or if it's just the bushings that are destroyed and need replacing? I don't want to have to replace both arms if I don't need to. not a ...
i need help replacing a right upper control arm on my 98 civic si jack up vehicle ,remove tire/wheel,separate upper ball joint from steering spindle. next open hood, look at the right front strut ...
REPLACE LOWER RIGHT CONTROL ARM ON 2000 HONDA CIVIC REPLACE LOWER RIGHT BALL AND CONTROL ARM You Tube Video
Usually answered in minutes!
1,130 Questions
1,041 Questions
758 Questions
811 Questions
722 Questions