Questions & Answers for: Dodge Intrepid control arms

I need to know where to put jack stands under a 2000 dodge intrepid under the cradle behind the control arms of vehicle and at the back along the rear suspension or rocker crimps

bushings worn out where control arms connect to rack & pinion Those are available from any parts store. Inner tie rod bushings.

bent control arm and cradle can i replace cradle and crossmember assembly? YES YOU CAN AND IT IS A LOT OF WORK

20003 Intrepid - My wiper washer fluid and motor quit working. My wiper washer fluid would quit working and than the next day work. Now my 2003 Intrepid Wipers don't work at all and my wiper washer ...

how to chnge control arm bushing on 1994 dodge intrepid Here are the instruction on how to replace your control arm bushing. please not that there is a special tool needed that you will need to get ...

...frame. Make sure everything is tight and the rubber is still in it. this could be ball joints, or control arm bushings. have this checked out. ball joints could break and leave you stranded. ...

on a 95 dodge intrepid the back drivers side thers a bar that connects to the wheel it runs like to the drivers back door what is it called not an axel Control arm

Auto Repair Manual (Free) downloads (only) shaking control arm

...control arms. U have the liitle rod in between both called idler arm or center link. Then u have upper and lower steering ball joints. All of this mounts tonor in some way are centerd on ur word ...

...joints ( no upper joints) , outer tie rod ends, inner tie rod ends, stabilizer bar bushings, lower control arm bushings , and finally a wheel alignment ,you have some bad looseness in one or more of ...