Questions & Answers for: Dodge Durango control arms

control arm on the truck and it seems to be that the bushings are creaking. so either changing the bushings or completely changing the upper control arms will help with that noise. hope this helps you

How do I remove the lower ball joint from the control arm on a 2000 Dodge Durango You'll need a joint puller (looks like a big tuning fork). Depending on how it's held on there, you may also need a ...

...saying but durangos have problems with upper control arms and they have bushing kits or control arm replacements. and these both fix the upper control arm from moving and making the creeking

autozone rent em free....well w/100$ deposit,but you get it back! by control arms i think you mean tie rods whether inner or outer you should check them and if no slack,then just change the balljoints

...control arms on both sides.Keep in mind to keep the jack stands underneath the lower control arms at all times because your suspension will be under load.Remove the brake calipers from both sides and ...

...my 2002 Dodge Durango SXT. Receiving conflicting advise. Some say that I have to replace the whole control arm with new ball joint. Others say that I can press the old ones out of the control arm

How do i replace lower control arm 2004 dodge durango Dodge Durango control arm available here with good quality and affordable price. Have a visit at this link in choosing the best part for your car.

...know if the lower suspension arms ( parts 52106376Aa and 52106397AA) come with integrated bushing or if the bushing can be bought seperately. New lower control arms come with bushings and ball

What prlblems may make a 1998 dodge durango sweak ? Suspension parts like control arm bushings,shocks,springs ect. how to change a pitman arm and a idler arm ona 1998 durango

...and nuts on upper control arm? Either 18 MM or 21 MM. If they look the same size as the lower control arm bolts. They are 18 MM. Rarely are upper arms changed. Upper ball joints are fairly