Questions & Answers for: Chevrolet C1500 control arms

...tight. The tie rods on both sides are both 12'' long.I am thinking maybe lower ball joint or lower controll arm? I need some help to fix this. Thank You Ron This sounds like a caster issue, add more ...

...arms to the cam.I've seen the wipers them selves strip out from freezing down to the windshield. The wiper motor is getting worn out. It's time to replace it. The wiper control module PCB is failing. ...

...Control arms on My 1979 chevy 1/2 ton pickup. I saw a replacement control arm that has the bushings and ball joints already installed. I'm trying to save the high labor cost that this involves. I can ...

control arms need to replace how do i go about it Upper Control Arm and Bushings?C-Series REMOVAL & INSTALLATION Raise and support the truck on jackstands. Fig. 1: Installing the upper control arm

You can do this at home you do not need a press, but a large hammer. Most of the older one are press fitted.Most of the new one you replace the entire upper or lower control arms.What year do ya have

...you have done that you then can check for the movement at wheel hub for movement in ball joints and control arm then get it aligned and see how much ...

bushings for a 95 chevy should I replace control arm bushings while I'm installing new upper and lower ball joints? No unless they are worn out, if they are you must do both sides.

left front lower control arm broken in 2004 Honda Civic Hybrid Left lower control arm broke. Do I need to replace the strut when the control arm is replaced? How do you replace the control arm? Can it

how to install lower control arm on a 1989 chevy 1/2 ton truck Advance Auto Parts Down for Maintenance

...lb ft)
Lower Ball Joint to Steering Knuckle Nut .................... 128 Nm (94 lb ft)
Lower Control Arm Bumper .................... 32 Nm (23 lb ft)
Lower Control Arm to Frame Nuts and ...