...connecting this product to a dj mixer because this unit has no internal mixer.To accomplish this you should connect the two outputs lines for channel 1 from this cd player to the two input lines on ...
I would like to connect my usb mixer (for music recordng) to NAD c320. The connection apparently requires 1/4'to RCA cable (which I have), however when I connect the mixer to AUX channel there is no ...
...mixer... you MUST use external amplifier !!!! You use bvalanced (TRS) cables to a suitable power amplifier which connects to speakers. Some Behringer mixers such as the PMP5000 have built in ...
Question about EuroPower EP4000 2Channel Amplifier
amplifier, how can i connect to a mixer The rule of thumb is you control your audio on the low side. That means you plug your mics, tuners, audio sources into the pre-amp and then the pre-amp into the
Question about EuroPower EP4000 2Channel Amplifier
...amplifier INPUT jack or amplified monitor speaker INPUT jacks. 4 Connect a balanced cable with the appropriate connectors from the mixer's MAIN OUT jacks to the INPUT RIGHT or LEFT jacks on the ...
Question about TRF152 15 Pro DJ PA Speaker
...not a powered (amplified) speaker, then you will need an amplifier to boost the sound source and drive the speakers, so you would connect the mixer to the amplifier, then the amp outs to the
Question about Xenyx 2222FX 22 Input Mixer
...mixer cannot find amplifier inputs on my mixer If you need a better answer post again with more details. You can connect an amplifier to any of the inputs assuming it has compatible output levels. In ...
Question about WT5810-16 Channel Space Diversity Wireless Microphone
...I cannot see how to connect these 2 items. Impossible because there isn't MIC IN on the amplifier.You may use small mixer to connect the mic.there and connect the mixer in AUX IN on Your ...
mixer does not provide power, so the speakers you're using have to be self-powered or be driven by a separate amplifier. You would then plug the Stereo Out connections into the INPUTs of the amplifier
Question about Nady SRM-10X 10-Input Mixer
connecting the mixer to the amplifier. If the cables are damaged or not connected properly, this can cause the amplifier to not produce any sound. Ensure that the cables are connected securely and are
Usually answered in minutes!
6,442 Questions
5,455 Questions
4,073 Questions
2,449 Questions
2,268 Questions
