...Disconnected. The IP Phone works in PoE Technology. Thank you in Advance. Andrew the first problem will be to check or replace the cable that you use to connect the phone or check the jack that you ...
hello, my cisco ip phone does not start Confirm if the Phone has power supply. and If it's connected to a POE switch confirm that it connects to the Switch port on the phone. Yes, if you are using a ...
...connect these phones to a home phone line they can only be connected to a network, and you will eather need to load the SIP firmware on the phone and have a SIP provider or use a call centre manager ...
7940 cisco ip phone being powered by a power brick seems to loose power when connected to the ethernet. When ethernet is disconnected, power comes back. Ethernet works fine when phone is not connected
...phone, however you"ll have to dis-connect from the internet to recieve or make a call, and if your on the phone you can"t get the internet. This phone jack adapter is available in Radio shack or even ...
...phone switch and connect multiple devices. But the phone will only work when connected directly to the wall jack. Connecting a hub or switch to the "PC" port on the back of the phone is not a ...
phone filters can be purchased at many electronics stores or provided free from your Internet Service Provider.Check to see if the modem is connected to a wireless router. If the modem is connected to
...connect to the SPA phone. I already entered my IP address, and it still cannot connect. You need to make sure that your laptop and IP phone are on the same network subnet. For instance, if you IP ...
Question about 7940 IP Phone
Phone looks fine but there are lines through the connection. I dial and get busy signal. Check all connections, everything seems fine, reset the phone a bunch of times, still not connected though. If ...
Question about 7941G IP Phone
...phone is trying to connect to a TFTP server address to download a firmware and/or config file update. You need to figure out what IP address it is trying to connect to (You may have to use wireshark ...
Usually answered in minutes!
57 Questions
67 Questions