Questions & Answers for: how do i connect mixer and amp Music

Ad

Question about 1202vlz3 12 Channel Mixer

1 Answer

...Mixer. I connect the Power Amp to CFX12 (Main In) and speakers, connect the CD to CFX12 (Tape In). I did not get any sound. Please advise what was the problem for not getting any sound and how to ...

Ad

Question about 1604 Vlz3 16 Channel Mixer

1 Answer

...connect it to the line in socket of the mixer ( not the XLR Mic in ). This will give a clean and flat sound which you will have to customize using the Mixer tone control and not the bass amp

Ad

Question about Marshall MG15FX Guitar Combo Amplifier - 8 Inch, 15 Watts

1 Answer

...connect the amp to a mixer. Mixer uses balanced outputs, this unit does not... Also ground loops can be a problem. Make sure this and the mixer are BOTH powered from the same receptacle. The next ...

Question about Sx2442fx Eurodesk 24channel Mixer New

2 Answers

...connect the mixer if using the PMP2000 as only a power amp. Note doing this will LIKELY disconnect any other input to the PMP2000 from the power amps in it... that is all the preamps in the PMP2000. ...

Question about 1604 Vlz3 16 Channel Mixer

1 Answer

...how you may wire your system. Please remember that compression, limiters and EQ device connect between the mixer and the amplifier with their prespective IN and OUT levels adjusted

Question about Xm910 8Channel Powered Mixer 900watts

1 Answer

...mixer to a power amp. can i connect a 10channel samson 900watt power mixer amp to a gli pro xa5500 3500watt amp and use it with various speakers. You have two aux sends on that mixer so quite easy to ...

...amp-mixer connected to the main mixer. the house speaker is connected to the power amp and then to the main mixer. so the problem is, the house speaker has poor sound quality(almost like it's ...

Question about Electronics Peavey PV14 Mixer

1 Answer

How do I connect the monitors to the mixer and amp? No knowledge of this stuff at all so please be specific as to inputs and outputs as well as right/left and A or B. Thank you. why are you doing this

Question about CFX 12 mkII 12 Ch. Compact SR Mixer w/Effects

1 Answer

...connect the output from the amp to the mixer.

A mixer is what it is, a device to mix lots of incoming audio signals and mixing the volumes to a number of speakers.

The unit does ...

...mixer to the amp the amp showing it clipping and no sound to the main speakers If you are getting signal from you mixer at leaves tha are clipping your amp, then the mixer is working and at least the ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...