Questions & Answers for: Yamaha how do i connect mixer and amp

Ad

Question about Emx88s Powered PA Mixer System

1 Answer

connect phone jacks to the speakers. Does the neutrik NL4 speaker connections work Independant from the phone jacks? Not usually. They are generally parallelled inside. But if it's the jack itself and

Ad

Question about Mg3214fx 32 Channel Mixer With Fx System

1 Answer

...connect the output from the backpanel of the mixer to the EUROPOWER EP1500/Ep2500 amp.please. Is it from the group out, group ins or send aux. or returns 1 and 2. mg32fx14 monitors intermitently cut ...

Ad

Question about Mg102c Stereo Mixer

3 Answers

...connect the mixer to the mic input, you will damage the sound card. MIC level inputs have an additional amplification stage. Dan Ok a mixer can be connected to a computers sound car via the ...

...amp The mixer is strictly a mixer. You would need to amplify to drive speakers. Used as a mixer it is fineand would support up to 4 mics. It does have phantom power for use with condenser mics if ...

...Make sure you use balanced lines to the external amp or powered speakers and power those from the SAME receptacle source as this mixer and any pwered devices connected to it for safety of the

Question about Rx-v365 A/V Home Theater Receiver

1 Answer

...output from mixer into low-frequency signal and high-frequency signal which you would then connect to the front and rear analog inputs. But with RX-V365 you can use only 2 channels with analog ...

Question about HD-200 / StagePas 300 Package

1 Answer

mixer to the power cord and switched on white smoke came from the air vent. What is this? Hi, Well, if the system does turns on, it could be just an OPAMP its one of various little 8-pin ic's that are

...mixer? How can I connect only one PR 15 Peavey speaker to a Yamaha emx 312 sc power mixer? I know the mixer is stereo and I have 2 pr 15 speakers, but if I needed to save space, could the mixer be ...

Question about HD-200 / StagePas 300 Package

1 Answer

...either come between the outputs of your mixer and the inputs of your amp, or you can connect your source (guitar, keyboard, microphone) into the eq and out into either a mixer or straight to the ...

...mixer you connect the midi to usb cable to the lap top. you now can record via your lap top or amplify your synth to speakers or monitors the mixer works as a pre amp for normalizing midi sounds to ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Yamaha Audio Player and Recorder Experts

 Grubhead
Grubhead

Level 3 Expert

5686 Answers

The Knight
The Knight

Level 3 Expert

76125 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Are you a Yamaha Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...