Questions & Answers for: Ford F-250 connect on line

Question about 1990 F250

1 Answer

line awhile ago, without making a diagram. Driver side brake hose has 2 conection points to connect steel brake lines. one conection is at the top of the hose, the other is a 90 degree conection. What

Ad

I am trying to remove the right head and can not get the fuel injection manifold line off the intake. You need a spring tool from parts store for removing fi /ac quick connect lines

Ad

Question about 2006 F-250 Super Duty

1 Answer

...line in" jack available under the radio cover or elsewhere to connect the Sirius radio to the truck audio system? NO there is no line input jack the AUX button was made for the rear video system but ...

Question about 2003 F250 Super Duty Crew Cab

1 Answer

line clips that were removed and the coolant crossover tube (if you removed it and don't forget to add coolant to the radiator). Reconnect all the wiring on the injection pump, except for the big pink

...right direction. arrow on fuel filter should point toward engine. double check that fuel lines are connected properly, some fuel pumps have three fuel lines one for pressure , one for return and one ...

Question about 2001 F250 Super Duty Super Cab

2 Answers

...and then to the vacum source at the intake manifold. Check these lines for leaks and the elec. connections at the pvh solenoid. There is also an O ring inside the hub assy. that can leak vacum, ...

Question about 1988 F 250

1 Answer

fuel lines on frame connecting to a round aparatus 2 lines on one side 4 lines on the other that go to the fuel tanks. I don`t know what the name of this part is. I broke one of the quick connects and

...hose diagram for ford f250 4.6 v8 I need the full on diagram of where all the vacuum lines go and connect to what...I have lines not connected and so far after it heats up it runs real rough...cant ...

...and the steel line that goes into the brake assembly? The steel line comes through the frame and connects to rubber line, how do you disconnect between the two, is it threaded or pressed together? ...

...that looks like a vaccuum line. Where does the other end of that line connect to? ABS unit maybe It goes to the front of the car either to the proportioning valve or directly to the master

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...