...light switch, it should be connected seperately to the black wire leading to the light(s). so the black lead of the switch should be connected to the power wire from the ceiling box and the blue wire ...
...light on the other switch. 6 black wires, 6 white wires, 6 grounds. I know which ones are for the lights and which one is coming from the circuit but I do not understand the diagram of hooking it up ...
Question about 003-1755-W Three Rocker Switches
...light to switch 3 by continuing on with new wire black,white, ground. Please help, I am stumped! remove white switch one and connect to incoming white ground--all whites should be connected [hooked] ...
Question about Westinghouse Lighting 3speed Ceiling Fan Switch 7707500
light housing - There are 4 thinner black wires that go to the 4 spot lights. The thicker black and white wires come down from the fan. There is a capacitator with a Black and Blue wire. It also has a
Question about #660IGU 15A Ivory SP Toggle Switch
...light works, but the fan does not. Do i need to connect that bridge wire to somewhere to get it to work again? Yes. The incoming hot wire should connect to the sensor switch with a wirenut. Put ...
...light. Connect the other black to the second switch that goes to your fan and light. Connect the three white wires together (neutral) Connect all ground wires together, and leave a pigtail to connect ...
Question about Fan,Bathroom Exhaust Broan QTXE150
...the black Hot from breaker connects to dark-colored screw(s) And your Load (fan-light) connect to brass colored screws. If you need more information, or if something is still confusing, answer
Question about 277W-BOX SINGLE POLE SWITCH & RED NEON PILOT LIGHT
...connect to brass Load screw and to silver screw that is opposite Load screw Option A) You want pilot-light-switch to turn on GFCI receptacle. a) Wire pilot-light-switch as described above b) Black ...
...connect one of the other black wires to 2nd brass screw. Turn on power and see if light turns on. -Try other black wire same way. -The black wire(s) that turn on lights on should be left connected to ...
Question about 277W-BOX SINGLE POLE SWITCH & RED NEON PILOT LIGHT
light switch could be broken and may be connected to the gearbox yes your brake light switch is connected to the shifter your brake light switch is faulty or wires leading to brake light switch..brake
Usually answered in minutes!
1,743 Questions
1,329 Questions
1,410 Questions
1,123 Questions
940 Questions