Questions & Answers for: conect wires Vacuums

Rain bow E series power head I had to take the power head handle apart to unclogg the hose. I have on wire with a protective sleeve on it that conects to the plastic handle but the other end I did not

I have central system vacuum cylinder engine is working but on the wall conection nothing is working. Check to see if the low voltage wires are attached to the tank. At the tank, if you switch it to ...

Possable broken/Disconected wire Hi My wife has a Rainbow D4s Vacum Cleaner Which seems to have a wire intermittently disconecting We are in New Zealand and Rainbow services and sales were removed ...

...wire jacked. gentally pull on the wire to see if it has a rubber band stile action if so remake the conection. as for dirt in the switch use a tech cleaning spray ( super wash ) to clean out the dirt ...

when i conect the vacum part to maun system it when i conect the vacum part to main system it dose not work. electerisity is ok . the motor i ok just the buttom part where you vacum is not working ...

switch dosn't turn on. is it switch or is it switch dosn't turn on. is it switch or is it plug? if you have changed the fuse in the plug and the wiring is ok there then it has to be the switch its ...

...on fire or ruin our outlets. no it should not get hot undo the plug and check if the wirers are conected tight one of the main causes is loose wires, have you tried a differant

...connected to the 2 motors using a simple switch to powering on and off. The original pcb is conected only to the batery, recharghing wires and led wires so i can recharge the batery as usual. ...

...wires, they go from rainbow and 6 conectors on main switch.I do not witch wire conect to witch conector.Have you some schema? Thak you. You can look for the service manual on line with Google. You ...