Questions & Answers for: Lexmark computer turn on

...turn off computer and then reboot. I have a Lexmark X73 all in one colour printer. The only way to get it to print is to set up the print job and then turn off the computer. When I turn the computer ...

...printer was working previously. Lexmark printer X2630 I deleted the printer and turned off the computer completely. Re-installed the printer and turned off the computer again. Turned the

...computer - turn off the computer - turn the computer back on - THEN insert the USB from the printer into the computer and wait about 15 seconds. - you should see "found hardware xxxx" and "installing ...

...computer. turn off the printer. install the printer software on the computer. if you already install the software, then restart the computer. turn on the printer and connected the printer to the ...

...turn computer completely off, wait 1 minute, then turn it back on) After Windows has fully started again, install the drivers off of the installation CD disk. Upon completing, restart the computer. ...

...turn off the printer and the computer. Unplug the printer. Turn on the computer. Bring it all the way up. Turn off the computer. Plug in the Lexmark. Turn on both machines. Install the printer

keeps saying can not communcate checked and repug cords Try turning off printer, unplug printer, turn off computer, plug in printer, turn on computer, turn on printer- in that order. It will all reset

...Computer, turn off the (Printer), unplug the printer from the Power outlet; do not make any changes to the computer. Disconnect (all) the printer cables from the computer; reconnect the cables to the ...

...computer seeing the printer? data cable secure, has drivers loaded okay,, with pc offplug in data cable,turn on and see if printer has been spotted by pc,,if not ,unplug ,data lead ,run pc for few ...

...t print need help lost if you are using the same computer and the same cables double check the connection, turn off the computer and the printer. and then 1. Turn on the printer 2. Turn on the ...