Questions & Answers for: D-Link computer turn on

...computer * turn off the router * turn off the modem after a minute or two * turn on the modem (if all lights are ok) * turn on the router * turn on the pc (check the connection) hopefully everything ...

...computer to the LAN ports and the WAN port of the router should be connected to the modem that you are using. if the physical connection is correct, check how you are connecting to the internet ...

turn on computer 2 and THEN computer 1. Computer 2 displays the CapLock and ScrollLock and then the NumLock lights. When the NumLock lightis on, I press the Numlock key to turn the light off, and then

...then turn the router on and let all the lights come on on it then turn the computer on. Don't turn the next item on until the previous item has all the lights on that are going to come on. Good ...

...site a there is no problem but in my own computer the power goes on and even the status and dsl but the LAN doesn't turn on and the computer doesn't connect to the internet! Maybe it is ethernet ...

...computer skills,,,help!! it's pretty easy to remedy... 1. turn off all computers including wi fi laptops... turn off routers, modem, wifi router as well. Here's the trick: Turn on your main router... ...

...your computer to the LAN port of the router. Turn off computer and router, turn on router first then turn on the computer. Run the set up wizard again. ...

...Turn it on. Restart your computer. After you do, your "wireless" connection should work. If you have an Ethernet cable between the router and the computer, then your "wired" connection also should ...

...and hold the reset button for 30 or more seconds. turn off the modem and all computers. reinstall the router. Turn on the modem ... wait ... turn on the router ... wait ... turn on your computer

...computer? Turn your cable-modem (or DSL-modem) off. Turn the router off. Turn your computer off. Cable-modem <---- Ethernet cable ---> WAN (or 'Internet') port on the router. LAN (or 'network') ...