Questions & Answers for: computer cords fall

has become loose from the motherboard, or it could be the adapter itself. Plug the adapter into the computer, and -gently- move the cord, just a bit. Does the end in the computer move around a little?

...computer. Is the mount broken or does something need reseting? Try a hard reset using the reset button under the silver trim on the front. Pull off the trim ring by hooking your fingernail under it ...

...blue light doesnt turn up. I called to hp and they told e only for look it its 300 . I bought this computer one year ago HP has shipped some bad notebooks and has what they call "Enhanced Warranty ...

...falling silent. I've tried using a different USB cord, and plugged the drive into a different computer. Neither computer recognizes the drive's existence. Is it truly dead? Thank you! Yes your ...

my laic 1 TB had a slight fall and now not being recognised by my computer If the power light illuminates swap connector cord of the same type if still not recognized you have a brand new door stop.

...computer. PLease let me know if they are available and their cost. Thanks Power cords are available in your local home workshop center. Try to check the exact fittings of the power cord and find the ...

...fall and hit a hard object, the camera might have gone out of position or gone bad, for the camera, you will have to disassemble the phone and either resit the camera or replace it if it is faulty. ...

Computer did not fall. There's two way on how we can turn our laptop on: 1. With the battery 2. Without the battery using the AC adapter or Power cord Try the above options to isolate your issue. - If

...do? I think either you have the wrong DC Power Jack installed (where the power cord plugs into the computer) or the wrong AC Adapter & Power Cord.Hopefully you have an AC Adapter Power Cord that ...

kocaso m1050s i bought my tablet in noc 2011 and this is the 2nd time thati have had to replace the tablet because i cant recharge it because the cords keeps falling out. Simce this is the 1st time ...