Questions & Answers for: Mitsubishi computer code

Question about 1991 Mighty Max

1 Answer

...computer stored a code. Even if the MIL goes out, the code will remain stored in the computer. It might be something as simple as an oxygen sensor, but the best way to do things is find out the code, ...

Ad

...computer output code. Is it possible to check the engine computer for a fault code using a multi meter? Where do you plug the meter into and what do the codes refer to? sorry you need a scan tool to ...

Ad

Question about 1996 Eclipse

2 Answers

is bad have them rescan the computer and erase the code and you will be good to go then. and autozone does not charge anything to scan your codes either. unlike a shop at around $85.00 just to scan it

Question about 1996 Eclipse

1 Answer

...code comes on, it is to signify that the CVT computer has detected an abnormality in the ABS computer, but you will need a scan tool to test the sensor wires properly; and as of right now, Mitsubishi ...

Question about 2002 Lancer

1 Answer

...engine running and only 2 sparks firing. loss of power. the engine block indicator might be the computer check engine lamp. go to the local parts supply store that offer to plug into the computer ...

Question about 2002 Lancer

1 Answer

...computer system will store a trouble code. most auto parts stores can retrieve the codes for you, after you get the codes get back with me and i will look them up for you and try to lead you down the ...

Question about 1998 Montero Sport

1 Answer

...code that is output by your engine control computer to let you know that the transmission control computer is reporting a problem with one of the transmission control solenoids.  To find out the ...

Question about 2002 Eclipse Spyder

2 Answers

...code. The car runs terrific. We feel the codes are erroneous. After resetting the computer the same codes return. Check engine light is on. Cannot pass emissions or reregister the car. Any ideas? ...

Question about 2002 Eclipse Spyder

1 Answer

...the battery (i.e. disconnecting power from the vehicle), this will RESET your vehicle's OBD computer. When the computer is reset, NO CODES should be present, UNLESS the computer has detected

...computer? the vehicle runs well , Scanner shows codes p0153and p0133 I doubt it. Code 133 is for the O2 sensor that covers cylinders one and four, and code 153 covers cylinders two and three. The ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Mitsubishi Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...