Questions & Answers for: Pentair communication

Since I had this unit it has be problematic. My easytouch 8 keeps losing communication. I moved the antenna 3 times and still on and off I get ?communication timeout screen. Any help is appreciated. ...

Pentair Easy Touch 8: Im getting a communication timeout on the remote when I send a command. It used to work fine (for 3 years) and now the error keeps coming up unless I'm standing next to the panel

...will not power up when I push the filter pump button at the panel. Would this be a bad relay or a communication cable not communicating to the pump? if voltage coming from relay ok check to pump if ...

what does no communication mean and how to i fix it so it can communicate? but it reads the outside air temp and date and time. check plug to control and for cut wire turn all off then back on

...communicate, you would need to purchase additional equipment. The IntelliComm will provide the communications bridge needed to operate this equipment with your existing model. Below is the

..."THERE WAS AN ERROR RETRIEVING THE DATA" ALSO WILL NOT READ THE OUTDOOR AIR TEMPERATURE - NO COMMUNICATION WITH MAIN OUTDOOR UNIT. OTHERWISE ALL FUNCTIONS OF THE REMOTE SEEM TO WORK. check ...

screenlogic2 communications I have connected both PC and Iphone wirelessly and gained access to the system. In fact this morning I was able to see the system with my iphone. Now, neither my iphone nor

When reconnecting the communication cable from the control panel to the Pentair pump, I accidently broke off one of the communication pins on the pump. Is there a way to repair or replace that pin ...

...end of that wire goes to an electronic circuit board with specific logic. It is in constant communication and or waiting for communication/confirmation, from that specific switch or sensor,

...Reset. Right button: Press the Right button to reset system. The main screen will be displayed and communication will be established with the optional EasyTouch Indoor Control Panel if