Questions & Answers for: comfort control module

...light went on, also no fule pressure. I freind that is a cert. VW mechanic said the comfort control could be the issue, agree? Yes, I agree. Comfort Control Module. Unfortunately it's pretty

...comfort control module under the drivers rug the fuse won't blow I have a 2000 passat that had issues with the comfort control module. A lot of the interior electronic features stopped working (i.e., ...

...comfort module is the main control module located under the drivers side of the dash. Use this diagram for the door trigger isolation: motorsport.com/images/install_notes/149.jpg Use DIAGRAM A. Hope ...

...Comfort (E&C) The DLC also provides a power source for the scan tool as follows: • Unswitched voltage (B+) at DLC terminal 16 (circuit 1450) • Ground at terminal 4 (circuit 1450) and terminal 5 ...

...by it's comfort aire GLUA 75-E3A IBM kicks on by it's self. Occured 5 times this summer. Disconected thermostat from furnance,still kicked on.Use for heat,no ac conected. ???? need a new control ...

reset control module I have a 2002 VW Gti T once you replace the comfort control module do you require to code program

comfort control problem 2002 gmc sierra comfort control module doesn't work properly, only stays on heat mode even when turn to cool/cold mold ? blend actuactor

...comfort alert control modules fail and will not allow any action to the unit. I've bypassed them and it worked fine but then you don't have that safety to lean on. The alert senses high or low ...

...Comfort Control Module... - YouTube ? 2:09 www.youtube.com/watch?v=9lBp_hiPc5c Oct 16, 2012 - Uploaded by Thomas EXOVCDS Sorry... didn't get a chance to record the removal of this. The module is ...

Comfort Tronic 4894. Why is water not coming out of hand piece? Comfort Tronic 4894, water is going to the box unit but stops there, no water to handpiece. There must be a water inlet solenoid the ...