Question about Variable - Speed Multipro Rotary Tool 395
dremel model 395 i'm stumped Unplug it, then while pushing in the little silver button near the head use a wrench on the hex nut and turn counter clockwise about a 1/2 turn. Push the bit in, then pull
...395 has the solid base of the collet stuck inside the threaded bit. I discovered this when I bought new collets to replace the broken one. How to I remove the piece? The new collets will not seat low ...
Question about Variable - Speed Multipro Rotary Tool 395
...one in today's mail, pretty kool for an item they quit making years and years ago. Hope this helps ...
Question about Variable - Speed Multipro Rotary Tool 395
Dremel Moto-tool model 395 type 1 lock I am in need of a replacement collet lock spring ( includes lock and spring) You can either go to Dremel.com and type in your model number for replacement parts ...
Question about Variable - Speed Multipro Rotary Tool 395
dremel model 365 type 1 collet lock latch is worn out. I would go to Dremel.com or call their help line at 1-800-437-3635 and speak with one of their specialists.
Question about Variable - Speed Multipro Rotary Tool 395
Dremel 395 in the middle of drilling sea glass and the collet and bit stop turning while the motor is still running fine! GRRRRR Thanks for any suggestions! sounds like the rubber connector between ...
...one attach the multipro flex shaft to the 395 dremel tool? Takes an adapter to screw onto the nose of the Dremel. The shaft itself is gripped by the correct size collet tightened as you would any
...dremel multipro model 395? Remove the collet nut and collet then unscrew the sealing cap (black plastic ring), this has the same thread as the inner of the multi kit tool, so just screw on the tool ...
Question about Variable - Speed Multipro Rotary Tool 395
...collets come in at least two sized to accommodate different sizes of tool shafts. Unfortunately the spare one you have is one of those sizes, and the one you extracted is probably the other. But they ...
Question about 395 Variable Speed Multipro Rotary Tool Kit
Dremel 395 type 1 Moto-Tool. How do I open collet on it. Nothing works Would there be a part that may be worn inside housing that is preventing collet from unscrewing? The "lock" button is not in the ...
Usually answered in minutes!
191 Questions
163 Questions
151 Questions
96 Questions