Questions & Answers for: coleman powermate wont start

wont start power mate 5500 wont turn over. checked the oil levels and thats fine. put in a new spark plug. seems to be getting gas. no problem. still wont turn over. Hi Check the spark at the plug,the

Coleman powermate 2500 won't start and gas is leaking out of the everything else is o.k but it won't start and has gas and oil it sounds like mine I think it is the carb is clog up I am still working ...

...coleman powermate 4000 I got this generator from my mom.It hasn't been fired up for 10+ yrs. It's real close to starting but just wont quite turn over. Need a manual. Oh ya...the last thing I'm going ...

Coleman 10 hp generator, not in use for 3 yrs. put gas , wont start. thanks for help. couple things you can do . drain carb and put new gas in , check air filter ( take it off and try to start with ...

coleman powermate 3750 wont start Check your oil level and add a little if it's low. Don't overfill. Also, make sure the unit is level. You may want to change the spark plug. Depending on the hours ...

powermate 6250 wont start i have a powermate 6250 it wont start. put in new plug it does have spark. new gas . any ideas try checking the WKM setting...i dont know what its called in english....but we

Coleman powermate wont restart spraying after release trigger We have a Coleman powermate PW0872400.01 2400 PSI 2.3 GPM pressure washer. It's worked pretty well for the last couple years. Now we have ...

Coleman, Powermate 12 HP 6000W generator I hate to ask,is there oil in it?There's a shut off for low oil level,it's to save the engine from starving for oil. open fueltap or clean carburator. can also

wont start won't start. Added oil & fuel. Put start button on. Put choke on. Pulled cord - won't start. Have not started it for approx 2 years. when you added fuel to the old fuel in the tank, i ...

...coleman powermate electric generator. Did it die due to a 2 week running? It won't turn over. if it doesnt turn over how did you test the spark? if i have read it wrong then always try a new spark ...