Questions & Answers for: coin trap kenmore front load

Question about HE2 Plus Front Load Washer

1 Answer

...found coins in the trap and ran the washer but it is still overflowing. the water level is controlled by a pressure switch. Either something is blocking the sensor hose or the switch is defective. ...

Ad

Question about Duet GHW9150P Front Load Washer

1 Answer

spin cycles. You have a clogged coin trap. Easy to fix. Just take the bottom pannel off and the trap will be right before your eyes. Clean it out and should work fine. Good luck and save yourself $120

Ad

Question about Duet GHW9150P Front Load Washer

1 Answer

...have a something slowing down the drain.. you can remove the bottom panel and clean out coin trap... if there is nothing then you may have another problem... but this is the most common

Question about 44102 Front Load Washer

1 Answer

...a f-code. this unit will not spin if it can not drain water for tub/ things to check are you are using HE soap and then clean coin trap in pump by removing front lower panel. the trap is right in ...

Question about Elite 45986 Front Load Washer

2 Answers

...trap. There is a coin catcher on the pump. The design of the wash action on a front loader is such there is less lint than on standard machines. One of the bennies of the design. Eric There is a lint ...

Question about HE2 Plus Front Load Washer

1 Answer

...kenmore 417-43042200 remove the lower toe kick panel below the door and remove the clean out trap,its a 2 to 3 inch round plug and it unscrews and it is probably full of debris ...

Question about HE2 Plus Front Load Washer

1 Answer

...coin trap, or a broken drain pump. The link below provides the detailed troubleshooting procedure of this error code. Error Code E20 on Frigidaire and Frigidaire-made (including Kenmore) Front Load ...

...coin trap Replacing shock absorbers and coin trap, front load washer. I have Eco Care 417.43042200. It started putting a lot of water on the floor, and I eventually found a hole in the coin trap. I ...

Question about 15864/15862 Top Load Washer

2 Answers

...coin trap assembly" is blocked, therefore not allowing all the water to pump out. Remove the clamp (or unscrew) that connects the trap assembly to the pump and clean it out. If helped pl say so. My ...

Kenmore He2 front loading washing machine when blinkinglights error code occurs ... How to Clean Front Load WasherDrain Filter and Empty the Water ... Front Load Washer Pump Clean Out - YouTube ? 3:03

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Brad Brown

Level 3 Expert

19187 Answers

Cindy Wells

Level 3 Expert

6688 Answers

john h

Level 3 Expert

29494 Answers

Are you a Washing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...