Questions & Answers for: coil and module

Question about Ignition Kit 2-8 HP Engines with Breaker Point Ignition #5012D

1 Answer

...coil to module, pos to ignition switch or starter button . Chk for current at coil +. . Coil -- should pulsate when cranking. Ensure there are no inline fuses, fuse box fuses, or fusible links ...

Ad

Question about 2005 Impala

3 Answers

...module, remove coil pack's little bolts two on each one, remove coil pack's and install new module, reinstall coil pack's and spark plug wire's and your ready to go. right under the coil pack. you ...

Ad

...module and the pick-up coil/stator located inside of the distributor is what generates the signal that the ECM (Engine Control Module) uses to time and fire the fuel injectors, as well as the signal ...

...coil and cause the new module to fail. Good luck, hope this helps out a bit. The ignition module is under the coils. It is what the coils plug on to. To replace it removal all the coils and unplug

...module and the pick-up coil/stator located inside of the distributor is what generates the signal that the ECM (Engine Control Module) uses to time and fire the fuel injectors, as well as the signal ...

module Install the coil fasteners Torque to 40 in-lbs (4.5 Nm) Connect the spark plug wires to coil assemblies --- Ignition Module Removal & Installation To Remove: Ignition Coils Before servicing

Question about 1991 Lumina

3 Answers

...coil and module assy is bolted near the camshaft housing cover under it. Follow spark plug wires back to the ignition module location on the following engins. On the 2.2L engine, the ignition module ...

Question about 2000 Sunfire

1 Answer

...circuit . you have to test ignition module first ,,,, remove coil test with led ignition module crank engine see if light is blinking. if yes coil defect ,,,if not module is defect hope it ...

Question about 1999 Silverado 1500

2 Answers

...coil/module. The eight ignition control circuits are connected to the PCM. The PCM triggers each ignition coil/module individually and makes all timing decisions. The ignition coil/modules are ...

...The IC circuits transmit timing pulses from the PCM to the ignition control module to trigger the ignition coil and fire the spark plug. The PCM controls ignition system sequencing and timing ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Hammering Experts

Brad Brown

Level 3 Expert

19187 Answers

john h

Level 3 Expert

29494 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66955 Answers

Are you a Hammering Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...