Questions & Answers for: Mercury codes p0305

...codes p0305 and p0306 Means cylinder 5 and 6 misfire detected. I need the firing order so I can check the coils. Thanks is not ford,driverside front close to rad #1,and then2,3,4 [same side]and pass. ...

i have a 2000 Mercury Villager Estate with 3.3 .it has code p0300 and p0305, i put new plugs, wires, cap, rotor, fuel injector and there's good compression.and its still miss fireing. i can pull the ...

...codes were p0301 p0302 and p0316 until i changed crank sensor and spark plugs now it says p0316 p0305 p0306.. whats going on? have new plugs and wires! Hi P0305 is misfire in cylinder #5. P0306 is ...

...codes P0305 and P0316. After the engine warms up the misfire disappears and the engine runs great. The trouble codes can be erased and they will not return until the next cold start. The following ...

...codes p0305 and p0308 Misfire condition on cylinder 5 (P0305) and cylinder 8 (P0308). There is a good explanation of it here : ...

...codes P0316 P0304 and p0305 and cod p0171 i have replace plugs ,wires, and coilpack. I took it to Ford who put it on diagnostics and advised it was losing 15% combustion in cyclinders 4-5-6 and that ...

...codes P0316 P0304 and p0305 and cod p0171 i have replace plugs ,wires, and coilpack. I took it to Ford who put it on diagnostics and advised it was losing 15% combustion in cyclinders 4-5-6 and that ...

...codes that came up on the code reader was SWC916 and CS0000 Those a not OBD trouble codes. OBDII trouble codes start with a P and are followed by four numbers. P0305 would be a proper trouble

codes and it ran fine for a couple of days, then I started getting ... (code P0305) on a 1999 Mercury Villager 3.3L - auto repair diy-auto-repair.wonderhowto.com/.../troubleshoot-misfire-code-p0305-1.

...p0305 p0306 codes Changed spark plugs after throwing a p0307 code. Cleared code. Car drove fine for a month (approx. 500 miles). Car than threw the p301 p305 p306 and p351 codes. Changed cop's from ...