Questions & Answers for: HP DesignJet code power

...cord. Reconnect the power cord and power On the Printer. �� If the System Error continues, replace the Ink Supply Tubes and Trailing Cable. HP DESIGNJET Z6100 ERROR CODE ...

...be the "trailing cable". Make sure the ends are flat and not damaged. Make sure it's seated correctly. Power on and see if error code is gone. If error code is still present, replace the Main

...code 21 : 13 Service Station error. Switch the power OFF from the back of the Printer and disconnect the power cord. Check the Primer Tubes. Reconnect the power cord and power On the Printer. Make ...

...Power ON the Printer and check if the Error Code disappears. If the Error Code continues, replace the Main Logic Board Note: The logic board is a direct replacement for the Designjet 1050C Plus and ...

the HP logo at boot up? Does it show an error code? If it boots but fan does not turn then the power supply must be replaced. If it doesn't boot, then the first step is to replace the power supply

...power switch at the back of the printer), wait 15 seconds and turn the printer on. If the error continues, replace the Line Sensor. (Check the error code closely to see the first two digits...this ...

...code 46:03 When you do a printhead cleaning it errors out with 46:03 System Error: 46:03 Problem Description: Primer servo shutdown. Corrective Action: Try the following: 1. Switch the Power OFF from ...

...code 02.01.10 Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. If error comes back, call a tech. There is a problem ...

...clear the blockage. Plug in the power cable again and check if the Error Code has disappeared -If this error code appeared but was NOT caused by a paper jam, replace the Paper-Axis Motor Drive ...

...code error 47:03 in my hp t770 and i dont know what to do please help me to solve this problem 47 errors are related to the starwheel motor. This is the motor that lifts the bar that the paper passes ...