Questions & Answers for: code power Cars & Trucks

...2.0 dohc The code P0340 set and the car has no power No power and code P0340 sets This code is set the camshaft position sensor, it is part of the ignition system, this can cause your loss of

Ad

code reader power Check engine light is on, running rough with no power up hill 40MPH Max. Connected code reader to unit with no power up to reader. Attempted to jump at diagnostic port to flash codes

Ad

code reader. When I connect the reader, it says its connected but won't read the computer. The car is hesitating in the higher rpms. It will surge into a power band in the transition from normal power

Question about 1996 Concorde

1 Answer

...Code 12 Description: Memory standby power recently lost Power loss light: Off Limp-in mode: None Possible Causes:* Battery or power line recently disconnected - This code is normal if the electrical ...

Question about 2011 Mustang GT

1 Answer

...is losing power, then you need to get your alternator and battery examined in order to stop future power issues. This could be linked to the p0345 code as voltage can fluctuate with power. Thank

power checked code tody seems to run ok now loss of power only 3 miles an hour put in natural reved engind waited for rmps to come down power resumed had engie code checkdd to today check engine light

...code. 899 is power take off code, Dealing with loss of power. 0164 is loss of communications. Again this could be loss of power. Clear the codes. run it down the road for a while , check codes ...

...power up does it go out after a few seconds? if so thats normal. if it stays on then you will need to go get the codes read and come back here with the code/codes for more help. Go to your nearest ...

Question about 2002 Windstar

1 Answer

...power relay location code reader indicates abs power relay Yes , but what is the code cxxxx ? What code reader are you using ? I'd have it check by a different one , no ABS power relay . Look here at ...

...power same codes come back p1093 first then U010C William Here are the main causes for the code, Clogged Fuel Filter Fuel system leakage Faulty fuel injector Faulty Fuel Rail Pressure (FRP) sensor ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...