Questions & Answers for: Jeep Cherokee code pause

Question about 1998 Cherokee

1 Answer

the 2nd digit of the code. For example, 3 flashes, pause, 7 flashes, means code 37. Check what the code means in a Haynes auto repair manual. This will tell you what the engine light on your car means

Ad

Question about 1993 Cherokee Country

1 Answer

...code 1 flash+ #1 etc numbers are seperated by a short pause. number sets ie:23 are seperated by a longer pause. Write down #s and check in a manual for meanings. If you have not disconnected the ...

Ad

Question about 1999 Cherokee

1 Answer

...code erased? Get in car Push brake and hold Turn IGN ON/OFF/ON/OFF/ON Wait for flashing lights sequence Write then down (3 blink, pause, 2 blink pause, 7 blink, LONG pause = 327.. then another one ...

...pause, then next set of falshes. If just crank sensor you will get firss code of 11, then next set will be 55 (end code) If you find this somewhat helpful, don't forget to rate it! Need further info? ...

Question about 1993 Cherokee Country

2 Answers

...pause, then next numbers) Write them down and check in a haynes and or chiltons manual to find the meanings. At this point a code 21 should be ignored (o2 sensor) as it can come on for a number of ...

Question about 1993 Cherokee Country

1 Answer

...code it will pause then flash again & that is the second # of the code. Flash 5 times pause then 5 more flashes is the # 55, & that is the last code you get to indicate all codes have been ...

Question about 1994 Cherokee Country

1 Answer

...the key on and off three times, then count the flashes. each code will be a 2 digit number (flash count for each numeral), then a pause inbetween to the next number. What are these codes if

Question about 1987 Cherokee

1 Answer

...code so there will be a slight pause in the blinking when this ocurse start the count over agian and so on..i suggest that you repeat this proces several time so that you know that you've got the ...

...pause and two flases measn a 32 code. Note this and send us for other details.Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you ...

to the wiring harness, and may have a plastic cap on it. It's shaped like a fat L. Extracting Fault Codes:Without ever starting the engine Turn the ignition switch ON, OFF, ON, OFF, ON and observe the

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

1998 Jeep Cherokee
1998 Jeep Cherokee

1,380 Questions

1999 Jeep Cherokee
1999 Jeep Cherokee

1,162 Questions

1995 Jeep Cherokee
1995 Jeep Cherokee

698 Questions

2000 Jeep Cherokee
2000 Jeep Cherokee

672 Questions

2001 Jeep Cherokee
2001 Jeep Cherokee

659 Questions

Manuals & User Guides

Loading...