Questions & Answers for: Toyota code pause

...code "24" 1 flash/pause/5 flashes is code "15" Get the codes & get that info back to me so that I will be able to assist you with your issue further. BUY AN O.B.D.2 TESTER. (ON BOARD DIAGNOSTICS) ...

...pause means error code 32. All the error codes have two digits. The blinking pattern will keep repeating. There could be more than one error code. Look up the error codes from any reference available ...

pause is 34. Write down what you see on a piece of paper. You will notice that the pattern repeats. You may have more than one error code. All the codes have two digits. Refer to an error code listing

code, then a pause and blink the second digit of the code. For example, Code 52 (knock sensor signal) will flash 5 times, pause and then flash 2 times, then a longer pause before it goes onto the next

code 31 the light will blink three times, short pause and then blink once. there will be a little bit longer of a pause between codes and a very long pause after all codes are done. Then you have your

then pause then twice. The first example is code 32, the second is code 12. These codes are in my manual, but you have to count them for me. Oh, by the way, is this a celica with the 2.2L 5sfe engine

...these will be blinked - first digit - pause - second digit - repreat. So the oxygen sensor fail code (a common one) is 21, and will show 2 blinks - pause - 1 blink - repeat.There are 22 of these ...

...trouble code 52 for a 1995 toyota celica when retriving codes from the check engine light it blinks 5 times then pause then 2 times Look up the codes you need at this website:

...code and DTCs 11 and 31 are shown in the following diagram. The first blinking pattern indicates the first digit DTC. The second blinking pattern occurs after a 1.5-second pause. If there are two or ...

...---- pause ---- would be a code 32 (3 pause 2) and a 44 (4 pause 4). If you can use that info, post results and maybe I can help. If not, having it checked by a professional may be a better