Questions & Answers for: c g code pad

...pad. If code does come on while touch pad is disconnected then replace main control. If touch pad and main control are all one part then replace the whole control. Doubt if you would have any luck ...

...code for systech transpotation service /* * To change this template, choose Tools | Templates * and open the template in the editor. */ //package optimalcluster; /** * * @author CSEEXAM2008 */ import ...

...and touch pad if this error code cannot be canceled. concerning the "F7". This code is linked to the "F1" code. if your touch pad is integrated with the main control board, replace the entire

code is the result of a failed function key on the key pad, or control board. Some control boards will have the touch pad, or key pad combined with the actual control board, as one whole unit. If this

...code. Er i s a Switch error (Replace Console Pn# 154639207) CE is a Configuration error (Replace Control Pn#154543602) UO is a Vent that will not close. (Replace Vent Pn#154682301) or remove blockage ...

...power disconnect the key pad from the clock and if code goes away key pad is at fault if it does not the eoc is at fault . and you will have to replace the clock . **** hope this helps . feed bk pls

code is the result of a failed function key on the key pad, or control board. Some control boards will have the touch pad, or key pad combined with the actual control board, as one whole unit. If this

Code Description Solution F0 Function key stuck Replace touch pad or if touch pad is part of the clock, replace the clock (ERC). F1 Defective touch pad or clock (ERC) Replace touch pad or clock (ERC).

code is the result of a failed function key on the key pad, or control board. Some control boards will have the touch pad, or key pad combined with the actual control board, as one whole unit. If this

code for a bad pad. If an air pocket in a pad colapses, the microwave thinks you are pushing and holding down a pad, so it will give a error code. An E-11 code may mean a bad touch panel on your unit.