Questions & Answers for: Pontiac G6 code p0128

erg code displayed circuit a shorted? I just replaced the catalytic converter on 2005 Pontiac G6 and check engine light remained on. I had it scanned and it said ''erg code displayed circuit A shorted

my cd changer does not work and I need the code Ok do the following to get the code to unlock the unit. GM DELCO THEFTLOCK RADIO UNLOCK CODE: 1. Press and hold presets 2 and 3 for about 5 to 10 ...

codes p0030 p0036 p0050 p0056 p0068 p0102 p0443 and u0107 on my 06 pontiac g6 gt are erroring. changed battery and got all these codes May be errant codes from losing power, erase them and see if they

I REPLACED THE ECT SENSOR AND CLEARED THE CODE BUT THE ENGINE LIGHT IS STILL COMING ON EVEN AFTER I CLEARED THE CODE. That, then tells you, that what you replaced was not the problem That is why you ...

How do you check codes on a g6 to look for errors Changed the battery now my car won't start Does the engine crank over? Trouble codes are retrieved with an OBD-II code reader or scanning ...

...p0128, p0401, p0455 check engine light. radio not working there is a code table hope it can help u and good luck Hi guy,this is a Diagnostic Trouble Code Table ,it can help you.And you need a cheap ...

...p0128, i need the location of this items if you can please, is a g6 3.5 v6 coupe. thank you Let me start by explaining what trouble codes are. Codes are only a guide for mechanics to use to ...

...code P0128 may mean that one or more of the following has happened: Low engine coolant level Leaking or stuck open thermostat Faulty cooling fan (running too much) Faulty coolant temperature (ECT) ...

...and light came back on. I replaced the timing chain and tensioner and all the guide. Still have codes There are recurrent fault codes because the diagnosis of the cause or causes of the problem ...

2008 Pontiac G6 base 3.5. I getting code P0315 and code P0355. I have have changed crank sensor. Now car will not start and the codes are still there? 2008 Pontiac G6 base model 3.5 liter. Question ...