Questions & Answers for: Dodge Ram 1500 code 46

Question about Dodge Ram 1500

1 Answer

i took my transmission pan off an on the magnet was 2 broken metal rings it is a 97 dodge ram 1500 5.9 4+4 i thank the trans is a 46 RE If they are thin and about .220 wide they are clutch backing ...

Ad

Question about 2001 Ram 1500 Truck 2WD

1 Answer

2001 dodge transmisson wont shift up code 1762 pickup Code 1762 is the governor pressure code which indicates an internal transmission problem with presssure to the governor which initiates the ...

Ad

Question about 1997 Ram 1500 Club Cab

1 Answer

...within the last 50 ingnition key on cycles. 46 charging system voltage too high.computer indicates that battery voltage is not regulated. 21 problem with o2 sensor signal circuit. 56 no code for ...

Question about 1996 Ram 1500 Club Cab

2 Answers

i have a 96 dodge with a 46 rh trany 4 speed. tanny started acting funny wouldn't come out of second till i moved tne gear shifter and revers is slipping barley grabs. did a filter change and after ...

i have a code p403. cleaned egr valve and checked o2 sensors. Unless you have a scanner to clear the code, remove the cables from battery for about an hour, this should clear the code, then after a ...

fix camshaaft timming on 2004 dodge ram1500 47cui have code p00113 how do ifix it For this problems,check the help links below,click the link to o through its troubleshooting procedure :----

Question about 2004 Ram 1500

1 Answer

error code p0770 code reader reads error code p0700 http://engine-codes.com/p0770_dodge.html will give you some info on the code

Question about 2004 Ram 1500

2 Answers

po 171, po 305, po 441 my 97 ram 1500 5.9l threw a po 441 code which mysteriously went away but the engine light stayed on. Checked again (using an ABD II scanner each time) this time I had 2 codes po

I have a 2001 dodge ram 1500 code P0443 code came on code p0455 code was on I replace the purge valve then the code p0443 came on code p0443=It's whining about the control circuit for the purge valve.

how much Freon and oil to add to a new used compressor didnt I just answer this? 46 oz of R143A 13 oz of oil.

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...