Questions & Answers for: Lincoln code for 300

...code and 300 miles later light came back on,I know that this code has to do with the EGR,but I am not having a Idle problem,just the reacurring light.... did you replace the egr ...

...code after 300 miles, i think it needs to be replaced You'll need an OBD II scan tool to clear them. A performance cat replacement is fine. I would replace it, due to the fact that alot of times the ...

200 lincoln ls 3.9 codes 171 174 300 2000 lincoln ls 3.9 codes 171 174 300 running real rough please help 171 and 174 mean it is running lean and 300 means a random cylinder misfire Start by replacing

...code even though 3rd cool pack has been replaced and various other 300 codes. When the transmission is disconnected, the noise stops, but 300 and 303 codes return after being reset. I have also ...

possible remedy/solution? Not spark plugs. Never was. Bad coils. Switch the COP Coil for the misfire cyl,and see if 300 code moves with coil. Does it go into Failsafe or just get the MIL Light on dash

2007 ford ranger 3.0 eng. codes po0301 4cyl miss fire do i look at injector or egr system PO 300 Codes are cylinder misfires,not injector or egr Coils,Coil Packs, Ignition,is where you check

300 Code It is really bad and spiking the PCM. That spike comes back on the TPS Sensor Then the PCM doesn't see what it should from the TPS and usually goes into ETC Fail Safe,thus the 2107 & 2110

...code P0351 ignition coil A. Im still not exactly sure what those letters A & H stand for but i think the P0351 is cylinder1 and P0358 Is cylinder8. Am i right or wrong on that? Basically i Know i ...

...(COP Ignition ) one is bad. Last number of a 300 code is the cyl maybe. Unless it is really bad,then get back here for more help Check the spark plugs, make sure ther is no water in the sparkplug ...

code 315, 300, 306 315 is a bad coil on #5 cylinder(could be bad wire to coil). 306 is #6 cylinder misfire(plug,boot or wires). 300 is random misfire, caused from #5 and #6 misfiring. Time for a tune ...